Dying Light is an older game, so almost any current graphics card runs it well; an entry-level card from the RTX 50 or Radeon RX 9000 lines is plenty for 1080p, a mid-range card covers 1440p comfortably, and there is little reason to buy a flagship for this title alone. The more important question is which Dying Light you mean, since the original and its sequel have very different demands.

Which Dying Light Are You Buying For?

This guide covers the original 2015 release, whose requirements the Steam store page lists in full. The sequel, Dying Light 2 Stay Human, is a newer and much heavier game with its own, higher requirements and ray tracing options; if that is your game, read its own store page and treat the entry-level picks below as the starting point rather than the destination. Neither the maker nor Steam gives exact frame-rate targets for either game, so none are invented here.

What the Original Lists

Level Graphics Processor Memory
Minimum GeForce GTX 560 or Radeon HD 6870, 1 GB VRAM Core i5-2500 at 3.3 GHz or AMD FX-8320 4 GB
Recommended GeForce GTX 780 or Radeon R9 290, 2 GB VRAM Core i5-4670K at 3.4 GHz or AMD FX-8350 8 GB

The store page also lists DirectX 11, 40 GB of storage and Windows 7 to 8.1 in its original text, with a note that Steam itself now supports only Windows 10 and later. These are decade-old targets. Every graphics card sold today, including integrated graphics in recent processors, exceeds the recommended GTX 780 tier by a wide margin.

Picking by Resolution

Goal Sensible GPU class Examples Why
1080p high refresh Entry level GeForce RTX 5050 or RTX 5060, Radeon RX 9060 XT, Arc B570 Far above the stated recommended card
1440p high refresh Entry to mid-range RTX 5060 Ti, RX 9060 XT 16 GB, RTX 5070 Headroom for supersampling and mods
4K Mid to upper mid-range RTX 5070 Ti, Radeon RX 9070 Resolution is the only real cost
Reuse an old card Previous generation GTX 1060 class or newer Comfortably above the listed recommendation

The reasoning is simple. The game was designed around hardware with 2 GB of VRAM, so VRAM size is not the constraint it is in modern releases. What matters is that the card handles DirectX 11 well and that you can push resolution and refresh rate as high as your display allows.

The CPU Matters More Than You Expect

Older open-world games of this era often depend on one or two fast cores, and the publisher’s own listing leans on the Core i5-4670K and FX-8350 for recommended play. A current six-core processor has no trouble, but if you are running a very old chip, a faster processor will lift frame consistency more than a new graphics card would. Dense crowds of infected and night chases are the moments where processor limits show first, as is typical for this style of game.

Upscaling Is Not the Point Here

The Steam store page for the original does not list DLSS or FSR support, so there is no upscaler to lean on, and with the hardware available now you will not need one. If you want a sharper image, render at a higher resolution through the display or driver options rather than at a lower one. NVIDIA, AMD and Intel drivers all offer resolution scaling features; the available names differ by vendor and driver version, so consult your driver’s control panel.

Where the extra power helps is in running very high refresh monitors. A 144 Hz or 240 Hz panel will be much easier to feed with an entry-level modern card than with the hardware the game launched on.

Pick X If

Choose If Skip if
RTX 5060 or RX 9060 XT you play at 1080p or 1440p and also want modern titles you only ever play older games
Intel Arc B570 or B580 you want strong value and have a recent platform your motherboard or CPU is very old, as Arc cards are known to prefer modern platforms
Used GTX 1060 or RX 580 class the game is the only target and the budget is tiny you want warranty and current drivers
RTX 5070 Ti or RX 9070 you also play 4K new releases you want to spend as little as possible
Integrated graphics you want only the lowest settings you expect high settings at 1440p

Common Mistakes

  • Overbuying. A flagship card gives almost nothing extra in a game with a 2 GB VRAM recommendation.
  • Confusing the original with the sequel. Dying Light 2 has much higher requirements and different graphics features.
  • Ignoring the processor. Very old CPUs are the more likely cause of stutter, not the graphics card.
  • Installing on a slow hard drive. The listing calls for 40 GB of space; an SSD shortens load times and reduces streaming hitches.
  • Chasing old driver advice. Forum tips from 2015 about specific legacy drivers do not apply to current cards.

Things to Keep in Mind With Laptops

The store page notes that laptop versions of listed GPUs may work but lack official support. In practice a modern gaming laptop with an RTX 50-series or Radeon laptop chip handles the original easily. The caution is mostly about very old laptop graphics, where cooling and shared memory matter more than the model name.

Alternatives and What to Skip

If you already own a card from the GTX 10 series onward, keep it; the upgrade will be invisible in this game. If you are building for several titles, buy for the heaviest of them and let this one ride along. If you are considering the sequel too, look at 12 GB or 16 GB cards in the RTX 5070 or RX 9070 class and read the sequel’s requirements page before you decide. Skip anything marketed as a bargain but with less than 4 GB of VRAM; it works on this old title but limits everything else you may play.

Finally, remember the display. A budget 1080p monitor limits what any card can show. A 1440p panel with variable refresh rate does more for how this game feels than moving up a GPU tier, because the card will be mostly idle either way.

Frequently Asked Questions

What is the minimum GPU for Dying Light?

The Steam store page lists a GeForce GTX 560 or Radeon HD 6870 with 1 GB of VRAM as the minimum. The recommended tier is a GeForce GTX 780 or Radeon R9 290 with 2 GB of VRAM.

Can integrated graphics run it?

Recent integrated graphics from AMD and Intel are generally stronger than the listed minimum, so lower settings are reasonable. The publisher does not publish integrated-graphics targets, so results depend on your exact chip and memory speed.

Does it support DLSS or FSR?

The store page does not mention either. With current hardware you can raise resolution instead of lowering it, so upscaling is not needed.

Is an RTX 5090 worth it for this game?

No. The game was built for much older hardware, and a flagship brings no practical benefit. Buy that class of card only if you play other demanding titles at 4K.

Is Dying Light 2 the same requirement level?

No, the sequel is a newer and more demanding game with its own store page requirements. Use a 12 GB or larger mid-range card as a starting idea and consult the publisher’s listing.

Which matters more, the GPU or the CPU?

For the original, a modern entry-level GPU is already more than enough, so the processor and storage are more likely to affect smoothness. A recent six-core chip and an SSD solve most complaints.

Related guides

Browse all Buying Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.